The ductility of suspended reinforced concrete slabs containing class L
welded wire fabric
R.I. Gilber, Z.I. Zakka, M. Curry
Upgrading of transmission towers using tension bracing diaphragm
S. Kitipornchai, F. Albermani
Assessment and prediction of remaining safe and serviceable life for corroding
infrastructure
R.E. Melchers
Progress in advanced modeling of building structures exposed to fire
R.J. Plank
Behaviour of composite beams stiffened by a longitudinal plate accounting
for time effects
P. Ansourian, G. Ranzi
Coupled geometric and viscoelastic nonlinearities in parabolic concrete filled
steel tubular arches
M.A. Bradford, R.I. Gilbert, T. Wang
Behaviour of the longitudinal shear connection in secondary composite beams
incorporating trapezoidal steel decking
S. Ernst, R.Q. Bridge, M. Patrick
Composite concrete slab and LVL flooring systems
M. Fragiacomo, B.L. Deam
Eccentric loading of externally confined fibre reinforced concrete columns
M.N.S. Hadi
Experimental study of two-way FRP composite slab
D. Huang, G.M. Van Erp, T.J. Heldt, C.L. Cattell
Local facesheet buckling of a sandwich plate with a graded core
S. Kitipornchai, J. Yang, K.M. Liew
Joining materials with glass fiber reinforced plastics - an experimental
study
P. Kumar, R. Kumar
Strength of high performance ferrocement (HPF) composites under axial compression
P.R. Kumar, C.B. Kameswara Rao
Shear connection in composite secondary beams with trapezoidal profiled fibre
reinforced concrete slabs
I. Lius, M.A. Bradford, B. Uy, A. Filonov, Z. Vrcelj
Elasto-plastic post-buckling analysis of plates resting on tensionless foundations
X. Ma, J. Butterworth, C. Clifton
Comparison of seismic performance of hsc columns confined by FRP tubes and
steel reinforcement
T. Ozbakkaloglu, M. Saatcioglu
The axial crushing of nanotubes
D. Ruan, G. Lu
Full scale testing on composite connection using trapezoid web profiled steel
section
M.M. Tahir, A. Saggaff, P.N. Shek, S. Mohamed
Behaviour and design of high performance steel (HPS) sections with concrete
infill subjected to abnormal loading
B. Uy
Bond tests on FRP retrofitted URM prisms
Q. Yang, C.R. Willis, R. Seracino, S.H. Xia, M.C. Griffith
Behaviour of T-stub connection to concrete-filled circular column with blind
bolts and extensions
H. Yao, H.H. Goldsworthy, E.F. Gad
Longitudinal and transverse partial interaction analysis of composite beams
accounting for time effects and shear-lag effects
P. Ansourian, G. Ranzi, F. Gara, G. Leoni
Transient analysis of dynamic soil-structure interaction using the scaled
boundary finite-element method
M.H. Bazyar, C. Song
Interfacial stresses of dissimilar thermorheologically anisotropic media
R.C. Chang, J.J. Chen, J.J. Shyr
Thermal stresses in multi-layered media with straight or circular boundaries
C.K. Chao, F.M. Chen
Limited rotation CMM model for FE analysis of RC membranes
S.J. Foster
The analysis of skew plates with two opposite simply supported edges
B.W. Golley, J. Petrolito
Boundary integral equations for the bending-stretching coupling analysis
of composite laminates
C. Hwu, Y.C. Liang
General variational principle based shear correction method
Y. Liu, C.K. Soh
Geometrically non-linear analysis of composite stiffened & sandwich
structures using the finite element method
R.E. Ojeda, N. Lawrence, G. Thomas, B.G. Prusty
Buckling of thick plates using finite strip-elements
J. Petrolito, B.W. Golley
Finite element analysis of cold-formed stud wall systems used in Australian
residential construction
M.M. Pham, Y. Zhuge, J.E. Mills
A probabilistic traffic load model for reliability assessments of bridges
S.G. Reid
Finite element analysis for predicting lateral-torsional buckling modification
factor
B. Suryoatmono, Winata
Combined limit and deformation analysis of strain softening structures
S. Tangaramvong, F. Tin-Loi
Evaluation of RHT model for modelling concrete in numerical simulation
Z.G. Tu, Y. Lu
Using fundamental solutions to recover the green's functions in the scaled
boundary finite element method
T.H. Vu, A.J. Deeks
A p-adaptive scaled boundary finite element technique using projection-based
interpolation and the steepest descent method
T.H. Vu, A.J. Deeks
Structural system identification of MR device-plane frame systems
J.H. Widjaja, B. Samali
Influence of non-uniform abutment and pier movements on pounding responses
of an isolated bridge structure
N. Chouw, M. Adam, H. Su
Effects of interface material on the dynamic behaviour of rigid blocks
M.A. ElGawady, Q. Ma, J. Butterworth, J.M. Ingham
Semi-active management of structures subjected to high frequency ground excitation
C.M. Ewing, R.P. Dhakal, J.G. Chase, J.B. Mander
Slab effects on building seismic performance
U. Gunasekaran, G.A. MacRae, R. Fenwick, A. Carr
Prediction of dynamic response due to distributed structural modifications
H. Hang, K. Shankar, J. Lai
Effect of spatial ground motion at a canyon site on dynamic structural responses
H. Hao, N. Chouw
Dynamic testing of the Sale Swing Bridge - before and after deck replacement
works
N. Haritos, M. Hewitt
Laboratory measurements of dynamic properties of rail pads subjected to incremental
preloads
S. Kaewunruen, A.M. Remennikov
A two-degree-of-freedom model for rain-wind-induced vibration of inclined
cables
X. Ma, Z. Zhong, D.D. Li
Simple, robust hybrid test systems for non-linear structural dynamic research
and development
K.J. Mulligan, J.G. Chase, R.B. Elliott, B. Horn, G. Danton
Semi-active tuned mass damper systems
K.J. Mulligan, M. Miguelgorry, V. Novello, J.G. Chase, G. Rodgers, B. Horn,
J.B. Mander, A. Carr, B.L. Deam
Elasto-plastic response of bar by combination of bending and twisting moment
K. Osawa, T. Yamanaka, T. Nishimura, K. Miura
The collapse behaviour of columns with low aspect-ratios
K. Rodsin, N.T.K. Lam, J.L. Wilson, H. Goldsworthy
Vibration of a simply supported functionally graded plate
Z. Zhong, T. Lu
Dependency of building fragility to source mechanisms of records selected
for incremental dynamic analysis
B.A. Bradley, R.P. Dhakal, J.B. Mander
Multi story semi-active tuned mass damper building system
M.H. Chey, J.B. Mander, A.J. Carr, J.G. Chase
Seismic protection of a four-storey one-fifth scale structure using semi-active
resetable tendon elements
R. Franco Anaya, A.J. Carr, J.B. Mander, J. Chase
Behaviour of brick veneer walls under in-plane racking load
D.J. Heath, E.F. Gad, J.L. Wilson, L. Simeoni
Seismic strengthening of low strength concrete columns by external confinement
using prefabricated sfrcc panels
A. Ilki, D. Akgun, R.O. Goray, C. Demir, N. Kumbasar
The dynamic out-of-plane behaviour of unreinforced masorny walls
E. Lumantarna, N.T.K. Lam, J. Wilson, M. Griffith, J. Vaculik
Partial capacity design, an alternative to the capacity design method
I. Muljati, B. Lumantarna, R.H. Saputra, A. Soegiarto
High force-to-volume extrusion dampers and shock absorbers for civil infrastructure
G.W. Rodgers, J.G. Chase, J.B. Mander, N.C. Leach, C.S. Denmead, L. Cleeve,
D. Heaton
Off-diagonal 2-4 damping technology using semi-active resetable devices
G.W. Rodgers, K.J. Mulligan, J.G. Chase, J.B. Mander, B.L. Deam, A.J. Carr
A rapid financial seismic risk assessment methodology with application to
bridge piers
K. Solberg, J.B. Mander, R.P. Dhakal
Performance of a damage protected highway bridge pier subjected to bi-directional
earthquake attack
K. Solberg, N. Mashiko, R.P. Dhakal, J.B. Mander
The effects of soil-pile foundation interaction on the inelastic seismic
response of building structures
Widodo
A component-based approach for modelling the effect of fire on steel joints
F. Block, I.W. Burgess, J.B. Davison, R.J. Plank
Fire performance of steel portal frame buildings
M.W. Bong, A.H. Buchanan, R.P. Dhakal, P.J. Moss
Simple method for modelling hollow core concrete slabs under fire
J. Chang, A.H. Buchanan, R.P. Dhakal, P.J. Moss
Fire resistance of connections in laminated veneer lumber (LVL)
P.J. Moss, A.H. Buchanan, J. Lau, T. Chuo
The behaviour of multi-bay, two-way reinforced concrete slabs in fire
P.J. Moss, R.P. Dhakal, A.H. Buchanan, G. Wang
Cold-formed steel columns under simulated fire conditions
T. Ranawaka, M. Mahendran
Thermal bowing of steel members due to non-uniform temperature distribution
M.B. Wong, M.A. Bradford
Effect of temperature prediction methods on fire resistance of steel members
M.B. Wong, K.H. Tan, Z.H. Wang
Experimental investigation of open and closed ended piles in soft clay
D.A. Gallagher, K.G. Gavin
Investigation of the effect of critical depth on the shaft resistance of
closed ended piles in clay
D.A. Gallagher, K.G. Gavin
Mechanical properties of quarry by-products
D. Ionescu
Electrokinetic treatment of soft Australian clay
M. Stojanov, M. Nastev
Dynamic interaction analysis of soil pile and structure due to harmonic wave
P.K. Wijaya
Analysis and design of pile - prestressed anchor supporting structure
Y.P. Zhu, X.L. Wang
Evaluation of rapid chloride permeability test results using systematic
increase of pozzolanic materials
M.S. Ahmed, O. Kayali
Cracking tendency of concretes made with slag blended cements subjected to
restrained shrinkage conditions
T. Aly, J.G. Sanjayan
A model for compressive failure in unreinforced masonry
K. Chaimoon, M.M. Attard
Dynamic properties of fibre reinforced and plain ultra high performance concrete
X. Gao, T.C.K. Molyneaux, I. Patnaikuni, S.M.S. Rahman
Tension and size effects of unreinforced concrete
C.J. Hartley, B.L. Deam
Direct shear tests with gamma ray imaging on steel fibres in cementitious
materials
G.G. Lee, S.J. Foster
Usage of sulphur and sulphur containing waste products in pavement materials
technology
D.L. Rakhmankulov, A.H. Agliullin, V.A. Vernik, A.I. Gabitov, A.Y. Chuykin
Use of reclaimed asphalt pavement as an aggregate in asphalt concrete
B. Rosnawati, A. Shahir
Mechanical properties of ultra low density glass micro-sphere filled syntactic
foam composites
K. Shankar, D. Cave
A review of permeable concrete and its application to pavements
Y. Zhuge
The effect of controlled permeability formwork on the curing of concrete
A.A. Adam, T.C.K. Molyneaux, I. Patnaikuni, D. Law
Load balancing of post-tensioned concrete beams with friction losses
M.A. Bradford, R.I. Gilbert, G. Brock
Performance of damage avoidance beam-column joint subassembly subjected to
bi-directional earthquake excitation
B.A. Bradley, R.P. Dhakal, J.B. Mander, L. Li
Damping in high strength concrete beams – prediction and comparison
S.H. Chowdhury, Y.C. Loo
Ultimate load behaviour of concrete wall panels with varying opening configurations
C. Cooper, H. Guan, D.J. Lee
Polymer fibre reinforced normal and high strength concrete beams in shear
S. Fragomeni
Prediction of punching shear failure behaviour of slab-edge column connections
with varying size and location of openings
V. Gardå, H. Guan, Y.C. Loo
Tension stiffening in lightly reinforced concrete beams or slabs containing
either steel or FRP reinforcement
R.I. Gilbert
Behaviour of R/C beam confined with FRP cylinder
T. Hara, S. Ishida
Torsional resistance of high-strength concrete beams
T. Hossain, P. Mendis, T. Aravinthan, G. Baker
Finite element analysis of reinforced concrete walls with openings in one-
and two-way action
D.J. Lee, H. Guan, J.H. Doh, S. Fragomeni
Fatigue behaviour of CFRP-repaired corroded RC beams
M.K.Y. Loo, S.J. Foster, S.T. Smith
An investigation into the behaviour of reactive powder concrete columns
A. Malik, S.J. Foster
Research on the property of concrete slabs with type II cold-rolled deformed
bars
G.J. Nie, Z. Zhong, X. Ma
The effect of corrosion on the capacity and behaviour of a 45 year-old post-tensioned
concrete bridge beams
T.M. Pape, R.E. Melchers
Shear strengthening of cracked RC beam using external post-tensioning
T.G. Suntharavadivel, T. Aravinthan, S. Luther
The influence of chloride induced corrosion cracks on the strength of reinforced
concrete
D.L. Tang, T.C.K. Molyneaux, R.J. Gravina, L. Ward, D. Law
Effect of concete tensile zones on the anchourage of bar reinforcement
A. Wheeler, R. Bridge, W. Marsden
Modelling single span and continuous deep beams using strut-and-tie method
N. Zhang, K.H. Tan
Behaviour and strut and tie modelling of asymmetrically loaded deep beams
N. Zhang, K.H. Tan
Simple model for overturning and damage
H.A. Al Abadi, N.T.K. Lam, E.F. Gad
Response of light-framed clad walls to blast vibrations
J. Corvetti, E.F. Gad, J.L. Wilson
Modelling localized response of steel fibre reinforced ultra high-strength
concrete panels under high velocity impact
A. Gupta, P. Mendis, T. Ngo, M. Rebentrost
Human-indiced vibration of floor systems and stadia - some practical observations
from field measurements
N. Haritos, E.F. Gad, J.L. Wilson
Numerical modelling of simply supported square tubular beams subjected to
a uniform blast load
H. Jama, M. Bambach, R. Grzebieta, X.L. Zhao
Blast induced ground vibration limits on infrastructure
Z.A. Krezel, E.F. Gad, J.L. Wilson, A. Moore, A. Richards
The teaching of impact dynamics
N.T.K. Lam
Analytical modelling of glazing panel subject to impact loading
R. Lumantarna, N.T.K. Lam, P. Mendis, E.F. Gad
Transmitted shock on contact with rubber
M. Ramirez, H.A. Al Abadi, N.T.K. Lam, E.F. Gad
Strength of concrete-filled stainless steel tubes under impact loading
K.J.R. Rasmussen, G. Ranzi
Impact resistance of reinforced concrete columns: experimental studies and
design considerations
A.M. Remennikov, S. Kaewunren
Impact response analysis of railway track structure using vehicle-track interaction
modelling
Y.Q. Sun, M. Dhanasekar, C. Cole
Heterogeneous model for concrete under blast loading
X.Q. Zhou, H. Hao
Yielding shear panel device for passive energy dissipation
R.W.K. Chan, F. Albermani, M.S. Williams
Structural Failure of Compact Tubes in Bending
M. Elchalakani
Structural collapse of slender and noncompact tubes in bending
M. Elchalakani, X.-L. Zhao, H. Jama
Basic behaviour of round press-joints used in an ultra long-spanning hybrid
steel deck
M. Glåsle, R.Q. Bridge
The effect of diffusible hydrogen on tensile properties of high strength
steel bead on plate weldments
R. Holdstock, D. Nolan, Z. Sterjovski
Experimental study of high strength steel beams subject to local buckling
effects
R.B. Tang, M. Mahendran
Effectiveness of a common leg reinforcing method used for strengthening existing
transmission towers
C. Tongkasame, J.E. Mills, Y. Zhuge
Analysis of seismic damage using time series models and artificial neural
networks
O.R. de Lautour, P. Omenzetter
Determining the seismic transfer function infimum for a structural design
C.E. Hann, J.G. Chase, W.-H. Wu
Damage database for residential structures
D. Heath, J. Corvetti, E.F. Gad, J.L. Wilson, F. Hodges
Modal-based damage identification methods for plate-like structures
J. Li, F.C. Choi, B. Samali
Multi-chemo physical approach to life-cycle assessment of structural concrete
K. Maekawa, E. Gebreyouhannes, N. Chijiwa
Real-time integral based structural health monitoring
I. Singh-Levett, J.G. Chase, C.E. Hann, B.L. Deam
Towards a rule-based matrix for evaluating distress mechanisms in bridges
S. Venkatesan, S. Setunge, T.C.K. Molyneaux, R.J. Gravina, J. Fenwick
Condition assessment of Balla Balla River Bridge in Western Australia
Y. Xia, H. Hao, A.J. Deeks
Buckling of thin rectangular plates by shearing force
K. Abe, A. Terao, Y. Nakahara, K. Miura, T. Nishimura
Simulation of crack interaction in a concrete beam
T.T. Bui, M.M. Attard
Flexural torsion in a thin rectangular bar
D.H. Clyde
An explicit finite element method for the analysis of masonry shear walls
containing reinforcement
M. Dhanasekar, W. Haider
An inverse approach for the evaluation of plastic constitutive parameters
from structural response
M. Dhanasekar, S. Jia
Verifications of shear strength of masonry walls retrofitted with FRP
M.A. ElGawady
Variational formulations in nonlinear frame analysis including shear deformation
J. Petrolito, K.A. Legge
Concrete stresses and strengths for gravity loading in a roman theatre
C.M. Zhu, H. Goldsworthy
Damage evaluation of a timber beam using modal-based method
F.C. Choi, J. Li, B. Samali, K. Crews
Defining appropriate limit states for design of timber connections in Australia
and New Zealand
K. Crews
Accessible and reliable design of stressed-skin panels - an Australian perspective
C. Gerber, K. Crews, C. Sigrist
Screw- and nail-gluing techniques for wood composite structures
C. Gerber, K. Crews, C. Sigrist
Development of composite elements sourced from home-grown timber for use
in domestic structures
J.R. Gilfillan, S.G. Gilbert
A cost effective approach for integrity assessment of timber bridges
J. Li, B. Samali, K. Crews
Quasi-static cyclic tests on seismic-resistant beam-to-column and column-to-foundation
subassemblies using Laminated Veneer Lumber (LVL)
A. Palermo, S. Pampanin, M. Fragiacomo, A.H. Buchanan, B.L. Deam, L. Pasticier
Mechanical properties and behaviour of falcataria-rubber wood LVL
J.A. Tjondro, M. Hadi
